Thermometer Accessories
Cole-Parmer Thermal Transfer Compound, 4 oz Tube
Silicone-free heat sink compound increases thermal conductivity in thermo wells for faster response time in comparison to air. This heat sink grease is also designed to transfer heat away from heat-generating components.
Cole-Parmer Type-J, Small-Diameter Standard Probe, Mini-Connector, 4" L, .063 Dia, Grounded
Note the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220F (104C); PVC handles are rated to 200F (93C); Stainless Steel handles are rated at 450F (232C); Mini Connectors are rated to 392F (200C).
Cole-Parmer Digi-Sense Compact RTD Probe, 100 Ohm, 3-Pin. 1.5" L, 5ft SS Braid Cable
RTD bendable probes are designed to measure temperature in a confined space.Maximum error for probe assembly is 1.1C + 0.12% of reading below 300F, 0.35% of reading above 300F. Alpha coefficient is 0.003850 omega/omega/C (DIN IEC 751). Resistance at ice point (0C) is 100 omega.
Cole-Parmer Extech 881602 Temperature K Surface Probe
Special-application thermocouple probes work with any meter accepting standard thermocouple plug connectors. Choose the Type (J/K) compatible with your meter.
Ace Glass, Inc. Adapter, #7 Ace-Thred top, 24/40 inner bottom, nylon bushing with PTFE ferrule
#7 Ace-Thred mini adapter with 24/40 inner joint bottom, and nylon bushing with PTFE ferrule. Used for probes, thermometers, bleed tubes, and electrodes. Adapter will accomm ODate items up to 7mm diameter. Suitable for vacuum work.
Cole-Parmer Digi-Sense Gen-Purpose PFA Ctd Thermistor Probe Phono Plug 10" L .200" Dia 5ft Coil
Note: Time constant is the time required to reach 63.2% of the new reading. To determine how long it will take to reach 99% of the new reading multiply the time constant by five. Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220F (104C); PVC handles are rated to 200F (93C); Stainless Steel handles are rated at 450F (232C); Mini Connectors are rated to 392F (200C).
Cole-Parmer H-B Instrument B61400-7300 Stainless Steel Clamping Thermometer Holder for 3.5 to 14.5mm Thermometers
Hold your thermometer firmly to the side of any beaker with this handy clip. Foam rubber holder has five holes ranging from 4 to 14 mm in diameter to hold almost any size thermometer. Constructed of steel and rubber for long life.
Cole-Parmer Type-J, Hypo Tip Probe, 4" L, Mini-Connector, .063" Dia, Grounded , 5ft Coil Cord
Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220F (104C); PVC handles are rated to 200F (93C); Stainless Steel handles are rated at 450F (232C); Mini Connectors are rated to 392F (200C). Warning: This product is not approved or intended for, and should not be used for medical, clinical, surgical or other patient oriented applications.
Perkin Elmer US LLC Penetration Probe Tip - Flat, 1 mm
The Quartz Parallel Plate Systems are the same as the Stainless Steel Parallel Plate Measuring Systems, just made of quartz. These measuring systems ship in a attractive wooden case and include 1 and 6 mm parallel plate probes, mounting hardware and instructions. These systems are compatible with the DMA 7/7e and TMA analyzers.